Tensilized Strapping Tape for Tubeless Bicycle Rims, 9.14m long, widths of 23/25/27/29/32/34mm, good residue-holding.

Features: 

- It is designed to fit the center channel and the bead locking rim bed precisely. 

- It can create an airtight seal between the tire and the rim bed. 

- With good stretchability and sealing performance, it is non-porous and won't have an impact on the fitting of the tire. 

- Made from composite materials, it is less stiff compared to nylon or acrylic alternatives. 

- The adhesive is specially formulated to adhere evenly and provide a long-lasting hold. 

- When it needs to be replaced, it won't leave a messy residue behind. 

- It is ultra-light in weight and hardly increases the weight load for light cycling. 

- It has a length of approximately 9.14 meters, which is sufficient for two wraps around a set of wheels. Specifications: 

- Item: Tubeless Bicycle Wheel Rim Tape 

- Backing film: Polyester; Tensilized strapping 

- Adhesive: Single-sided; synthetic rubber adhesive 

- Type: Pressure Sensitive 

- Thickness: Approximately 0.12mm 

- Size: Width can be taken according to the order option. 

- Length: Approximately 9.14 meters 

- Application: Clean the rim bed with alcohol. Then, tightly wrap the rim bed with two overlaps at the valve stem and make a puncture hole for the valve stem. 

 Tape Length on Rim for reference: 

1. For a 26-inch rim, the diameter is 0.559m. The circumference is calculated as 0.559m * 3.14 = 1.76m. Around 2 meters are needed for one rim including the overlap at the valve stem. 

2. For a 27.5-inch rim, the  diameter is 0.584m. The circumference is 0.584m * 3.14 = 1.83m. Around 2.1 meters are needed for one rim including the overlap at the valve stem. 

3. For a 29-inch & 700C rim, the diameter is 0.622m. The circumference is 0.622m * 3.14 = 1.95m. Around 2.3 meters are needed for one rim including the overlap at the valve stem.

 Package includes: 

1 * Roll of tape

Geschätzte Lieferzeit: 7–13 Tage.